China Skin Pass Mill Suppliers - High-Performance Factory Equipment for CR Strip Coil Processing
Technical Parameter Table
|
MODEL TECHNICAL PARAMETER |
650 | 750 | 850 | 1000 |
| Material | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel |
| Material thickness (mm) | 0.16~1.5 | 0.3~0.8~1.5 | 0.3~0.8~1.5 | 0.3~1.5 |
| Material width (mm) | 550 | 650 | 750 | 900 |
| Elongation rate (%) | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 |
| Line speed (m/min) | 180~300 | 180~300 | 180~400 | 240~600 |
| Tempering mill type | 2 roll or 4 roll | 2 roll or 4 roll | 4 roll | 4 roll |
| Tempering force (KN) | 1450 | 1700 | 2000 | 2500 |
| Driving method | Working roll driving | Working roll driving | Working roll driving | Working roll driving |
| Hydraulic station pressure (MPa) | 10 | 10 | 10 | 10 |
| Main motor | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) |
| Uncoiler motor | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) |
| Recoiler motor | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) |
| S roll motor | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) | Z4 series(omit) |
Remark: the model and parameter shown in this table are for reference only. The design and production can be tailor-made according to user's requirements.
Frequently Asked Questions (FAQ)
What materials are compatible with these temper mill models?
All four models (650, 750, 850, and 1000) are compatible with both normal carbon steel and stainless steel, making them versatile for a wide range of cold rolling applications.
What is the maximum line speed achievable with the Model 1000?
The Model 1000 supports the highest line speed among the four models, reaching up to 600 m/min, making it ideal for high-productivity production lines.
What is the difference between the 2-roll and 4-roll tempering mill configurations?
The 2-roll configuration is available for Models 650 and 750, offering a simpler setup suitable for lighter gauge materials. The 4-roll configuration provides greater rolling force and precision, and is standard on Models 850 and 1000.
Can the specifications be customized to meet specific production requirements?
Yes. All models listed in this technical parameter table are for reference only. The design and production can be fully tailor-made according to the user's specific process requirements, material types, and line configurations.
What type of motor is used for the main drive, uncoiler, recoiler, and S roll?
All four models use Z4 series DC motors for the main motor, uncoiler motor, recoiler motor, and S roll motor. The specific motor power ratings are customized based on the actual production line configuration.
What is the hydraulic station pressure used across all models?
All models — 650, 750, 850, and 1000 — operate at a hydraulic station pressure of 10 MPa, ensuring consistent and reliable hydraulic control across the entire product range.