Skin Pass Mill Equipment for CR Strip Coil - Quality Suppliers & Factory in China
Technical Parameter Table
| Model / Technical Parameter | 650 | 750 | 850 | 1000 |
|---|---|---|---|---|
| Material | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel |
| Material thickness (mm) | 0.16~1.5 | 0.3~0.8~1.5 | 0.3~0.8~1.5 | 0.3~1.5 |
| Material width (mm) | 550 | 650 | 750 | 900 |
| Elongation rate (%) | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 |
| Line speed (m/min) | 180~300 | 180~300 | 180~400 | 240~600 |
| Tempering mill type | 2 roll or 4 roll | 2 roll or 4 roll | 4 roll | 4 roll |
| Tempering force (KN) | 1450 | 1700 | 2000 | 2500 |
| Driving method | Working roll driving | Working roll driving | Working roll driving | Working roll driving |
| Hydraulic station pressure (MPa) | 10 | 10 | 10 | 10 |
| Main motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Uncoiler motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Recoiler motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| S roll motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
⚠️
Remark: The model and parameters shown in this table are for reference only. The design and production can be tailor-made according to user's requirements.
❓ Frequently Asked Questions (FAQ)
Q
What materials are compatible with these temper rolling mill models?
All four models (650, 750, 850, and 1000) are compatible with normal carbon steel and stainless steel, making them suitable for a wide range of industrial steel processing applications.
Q
What is the maximum line speed available across the model range?
The Model 1000 offers the highest line speed, ranging from 240 to 600 m/min, making it ideal for high-throughput production environments requiring fast processing speeds.
Q
What is the difference between the 2-roll and 4-roll tempering mill types?
The 2-roll configuration is available for Models 650 and 750, while Models 850 and 1000 use exclusively the 4-roll configuration. The 4-roll design generally provides higher rolling force stability and is better suited for thicker or harder materials requiring greater tempering force.
Q
Can the machine specifications be customized to meet specific production requirements?
Yes. The parameters listed in the technical table are for reference only. Both the design and production can be fully tailor-made to meet individual user requirements, including material type, thickness range, line speed, and rolling force configurations.
Q
What type of motors are used across all models?
All models use Z4 series motors for the main motor, uncoiler motor, recoiler motor, and S roll motor. The specific power ratings are determined based on the individual project specifications and are indicated as "omit" in the standard reference table.
Q
What is the hydraulic station pressure used in these machines?
All four models operate at a hydraulic station pressure of 10 MPa, ensuring consistent and reliable hydraulic clamping performance across the entire product range.