High-Quality Skin Pass Mill from China Suppliers - Efficient Factory Equipment for CR Strip Coil Processing
Technical Parameter Table
| Model / Technical Parameter | 650 | 750 | 850 | 1000 |
|---|---|---|---|---|
| Material | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel |
| Material Thickness (mm) | 0.16~1.5 | 0.3~0.8~1.5 | 0.3~0.8~1.5 | 0.3~1.5 |
| Material Width (mm) | 550 | 650 | 750 | 900 |
| Elongation Rate (%) | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 |
| Line Speed (m/min) | 180~300 | 180~300 | 180~400 | 240~600 |
| Tempering Mill Type | 2 roll or 4 roll | 2 roll or 4 roll | 4 roll | 4 roll |
| Tempering Force (KN) | 1450 | 1700 | 2000 | 2500 |
| Driving Method | Working roll driving | Working roll driving | Working roll driving | Working roll driving |
| Hydraulic Station Pressure (MPa) | 10 | 10 | 10 | 10 |
| Main Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Uncoiler Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Recoiler Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| S Roll Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
📌
Remark: The model and parameters shown in this table are for reference only. The design and production can be tailor-made according to user's requirements.
Frequently Asked Questions
What materials are compatible with these temper mill models?
All four models (650, 750, 850, and 1000) are compatible with normal carbon steel and stainless steel, making them versatile for a wide range of industrial applications.
What is the maximum material thickness that these temper mills can handle?
All models support a maximum material thickness of 1.5 mm. The Model 650 starts from as thin as 0.16 mm, while the 750, 850, and 1000 models begin from 0.3 mm.
Which model offers the highest line speed?
The Model 1000 offers the highest line speed, ranging from 240 to 600 m/min, making it ideal for high-throughput production environments.
What is the difference between the 2-roll and 4-roll tempering mill configurations?
The 2-roll configuration is available only on the 650 and 750 models, offering a simpler setup for lighter gauge materials. The 4-roll configuration, available across all models, provides greater rolling force and is better suited for demanding flatness and surface quality requirements.
Can the temper mill parameters be customized to meet specific production requirements?
Yes. All models and parameters listed in the table are for reference only. The design and production can be fully tailor-made according to the user's specific requirements, including custom material widths, line speeds, and motor configurations.
What type of motors are used in these temper mill machines?
All models utilize Z4 series motors for the main motor, uncoiler motor, recoiler motor, and S roll motor. The exact motor specifications are determined during the customization and engineering phase based on production needs.