China Skin Pass Mill Suppliers - High-Quality Tempering Equipment Factory for CR Strip Coil Processing
Technical Parameter Table
| Model / Technical Parameter | 650 | 750 | 850 | 1000 |
|---|---|---|---|---|
| Material | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel |
| Material thickness (mm) | 0.16~1.5 | 0.3~0.8~1.5 | 0.3~0.8~1.5 | 0.3~1.5 |
| Material width (mm) | 550 | 650 | 750 | 900 |
| Elongation rate (%) | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 |
| Line speed (m/min) | 180~300 | 180~300 | 180~400 | 240~600 |
| Tempering mill type | 2 roll or 4 roll | 2 roll or 4 roll | 4 roll | 4 roll |
| Tempering force (KN) | 1450 | 1700 | 2000 | 2500 |
| Driving method | Working roll driving | Working roll driving | Working roll driving | Working roll driving |
| Hydraulic station pressure (MPa) | 10 | 10 | 10 | 10 |
| Main motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Uncoiler motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Recoiler motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| S roll motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
⚠️
Remark: The model and parameters shown in this table are for reference only. The design and production can be tailor-made according to user's requirements.
Frequently Asked Questions (FAQ)
What materials are compatible with these temper mill models?
All four models (650, 750, 850, and 1000) are compatible with both normal carbon steel and stainless steel, making them versatile for a wide range of industrial metalworking applications.
What is the maximum material thickness these temper mills can handle?
All models support a maximum material thickness of 1.5 mm. The Model 650 can process material as thin as 0.16 mm, while Models 750, 850, and 1000 start from 0.3 mm thickness.
What is the difference between the 2-roll and 4-roll tempering mill types?
The 2-roll configuration is available for Models 650 and 750 and is suitable for lighter-duty applications. The 4-roll configuration provides greater rolling force and precision, and is standard for Models 850 and 1000, which require higher tempering forces of up to 2500 KN.
Can the technical parameters be customized to meet specific production requirements?
Yes. The models and parameters listed in the table are for reference only. Both design and production can be fully tailor-made to match your specific operational requirements, including material width, line speed, elongation rate, and more.
What type of motor is used across all temper mill models?
All models use the Z4 series DC motors for the main drive, uncoiler, recoiler, and S-roll functions. Specific motor power ratings are determined based on customized configuration and are provided upon request.
What is the hydraulic station pressure for these temper mills?
The hydraulic station pressure is standardized at 10 MPa across all four models (650, 750, 850, and 1000), ensuring consistent and reliable hydraulic clamping and rolling force control during operation.