Skin Pass Mill for CR Strip Coil - China Suppliers and Factory Equipment with Advanced Features
Technical Parameter Table
| Model / Technical Parameter | 650 | 750 | 850 | 1000 |
|---|---|---|---|---|
| Material | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel | Normal carbon steel, stainless steel |
| Material Thickness (mm) | 0.16~1.5 | 0.3~0.8~1.5 | 0.3~0.8~1.5 | 0.3~1.5 |
| Material Width (mm) | 550 | 650 | 750 | 900 |
| Elongation Rate (%) | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 | 0.2~3.0 |
| Line Speed (m/min) | 180~300 | 180~300 | 180~400 | 240~600 |
| Tempering Mill Type | 2 roll or 4 roll | 2 roll or 4 roll | 4 roll | 4 roll |
| Tempering Force (KN) | 1450 | 1700 | 2000 | 2500 |
| Driving Method | Working roll driving | Working roll driving | Working roll driving | Working roll driving |
| Hydraulic Station Pressure (MPa) | 10 | 10 | 10 | 10 |
| Main Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Uncoiler Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| Recoiler Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
| S Roll Motor | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) | Z4 series (omit) |
⚠️
Remark: The model and parameters shown in this table are for reference only. The design and production can be tailor-made according to user's requirements.
Frequently Asked Questions (FAQ)
What materials are compatible with these temper mill models?
All four models (650, 750, 850, and 1000) support normal carbon steel and stainless steel, making them suitable for a wide range of industrial sheet metal processing applications.
What is the maximum line speed achievable across these models?
The Model 1000 offers the highest line speed, ranging from 240 to 600 m/min, while other models range from 180 to 400 m/min depending on the specific configuration.
What is the difference between 2-roll and 4-roll tempering mill types?
The 2-roll configuration is suitable for lighter-duty applications and thinner materials, while the 4-roll configuration provides greater rigidity and precision, which is why the 850 and 1000 models exclusively use 4-roll mills. Models 650 and 750 offer the flexibility of either configuration.
Can the equipment parameters be customized according to specific production requirements?
Yes. The models and parameters listed in the table are for reference only. The design and production of each unit can be fully tailor-made to meet the specific requirements and production conditions of individual users.
What type of motor is used across all models and components?
All models utilize the Z4 series motors for the main drive, uncoiler, recoiler, and S roll. The specific motor specifications (power and speed) are determined based on the customized configuration and are provided upon final order confirmation.
What is the hydraulic station pressure used in all models?
All four models operate at a consistent hydraulic station pressure of 10 MPa, ensuring stable rolling force control and reliable performance across the full range of supported material thicknesses and widths.