HR Coil Slitting Line - High-Quality Slitting Machine from China Suppliers and Factory for Metal Coil Processing
Product Introduction
The slitting machine is a key piece of equipment in industry for cutting wide metal or non-metallic coil materials into several narrow strips of the required width along the length direction. Its core working principle is to continuously roll-cut the material through the rotation of the upper and lower circular disc knife shafts.
The following is a comprehensive introduction to the core features of the slitting and shearing machine:
The core structure mainly consists of upper and lower knife shafts, fixed/movable frames, and a synchronous lifting mechanism. The knife shafts and frames undergo precise processing (such as turning, high-frequency treatment, grinding, and chrome plating, etc.) to ensure the rigidity and accuracy of the equipment.
This series of production line is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling.
It has advantages such as proper layout, easy operation, highly automated and high production efficiency.
- Cold-rolled and hot-rolled coils
- Silicon steel coils & stainless steel coils
- Colored coils & aluminum coils
- All sorts of plated and coated coils
This line consists of loading cart, uncoiler, slitter, scrap winder, cropping shear, tension controller and coil recoiler, etc. Loop bridge, pinch and deviation corrector are equipped between each machine. This automatic coil processing line is an integration of mechanical, electrical, hydraulic and pneumatic technology.
- Automobile manufacturing
- Home appliance production
- Construction materials (cabinets, kitchenware, doors and windows)
- Hardware products & containers
- Electronic appliances
- Light industry and packaging
Main Technical Parameter
| Model | Thickness | Width | Coil Weight | Finish Width | Slitting Strips | Slitting Speed | Area Needed | Main Shaft Dia. |
|---|---|---|---|---|---|---|---|---|
| 3×1600 | 0.5–3mm | 900–1600mm | 30T | ≥40mm | ≤13 | 50m/min | 21×11m | Φ240 |
| 4×1600 | 0.5–4mm | 900–1600mm | 30T | ≥60mm | ≤13 | 50m/min | 21×11m | Φ240 |
| 6×1600 | 1–6mm | 900–1600mm | 30T | ≥60mm | ≤10 | 50m/min | 21×11m | Φ260 |
| 8×2000 | 2–8mm | 900–2000mm | 35T | ≥70mm | ≤6 | 30m/min | 30×11m | Φ300 |
| 10×2200 | 3–10mm | 900–2200mm | 35T | ≥80mm | ≤5 | 30m/min | 35×11m | Φ320 |
| 12×2200 | 3–12mm | 900–2200mm | 35T | ≥100mm | ≤5 | 30m/min | 38×11m | Φ320 |
| 16×2500 | 4–16mm | 900–2500mm | 35T | ≥100mm | ≤5 | 20m/min | 38×11m | Φ400 |
| 20×2500 | 6–20mm | 900–2500mm | 35T | ≥100mm | ≤4 | 20m/min | 38×11m | Φ480 |